Kushal Enterprises

MYK Laticrete 315 Tile Adhesives A high performance polymer based adhesive to be mixed with water or latex for installing medium & large format ceramic tiles, vitrified tiles, marble and stone on floors and walls. Combine with  73 Crete Admix for improved performance. l
Features and Benefits:
For fixing ceramic, vitrified tiles & natural stone on interior floor & wall
Ideal for tile-on-tile & new floor tiling
High bond strength
Single component - Just add water

Certification:
ANSI: A 118.1 T
EN: EN12004 / ISO 13007 : C1T
IS 15477:2019: TYPE 2  T ADHESIVE
VOC:Practically Nil

How to apply:
Substrate: The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m
Surface Preparation:
If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
Ensure the substrate is clean and free from impurities like dust, dirt, debris, oil, grease, curing agents, loose plaster etc
Dampen the wall before application of thin set adhesive
Clean the back of tile for any dust or coating

Mixing: The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder LATICRETE® 290 and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for immediate need.
Proportion: Approximately 1 bag of LATICRETE® 290 with 5-6 ltrs of water. Adjust quantity of liquid to obtain proper consistency.
Application:
Designed especially for interior floor and wall installations and external floor installations of all types of ceramic tile, vitrified tile, precast terrazzo and natural stones over concrete and on a variety of cement-based substrates. Can be used upto a maximum 12mm bed thickness.

MYK Laticrete Dry wall adhesive