Kushal Enterprises

T04 Roff Glass Tile Adhesive is a high-performance adhesive specifically formulated for the installation of glass tiles. This product offers exceptional bonding strength, ensuring that tiles remain securely in place while providing a smooth finish. Its unique composition allows for flexibility and resistance to moisture, making it ideal for both indoor and outdoor applications. Easy to apply, T04 Roff Glass Tile Adhesive is suitable for various substrates, ensuring a reliable solution for all glass tile projects.

Roff White Adhesive is a blended polymer modified white cement based Tile/Marble /Stone adhesive with improved strength. It provides durable adhesion to Tile/Marble/ Stone fixed in internal & in high temperature conditions.

Features & Benefits

• Crack free, breakage free & firm surface that preserves beauty of tiling for longer time
• Ready to use, needs no curing
• Excellent adhesion with low shrinkage
• Quick tiling benefits for contractors & consumers in terms of time saving
• Slip Resistant

Method of Application

• The surface to be tiled should be clean and sound. Old surfaces must be free from wax, grease, polish, etc.
• Add 3 - 3.5 parts of Roff WMA powder to 1 part of water.  
• Mix with a trowel / slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained.
• Always mix the required quantity, which can be consumed with in the prescribed pot life. 
• Leave the mixture for 5 min. before using.
• Spread the adhesive to a required thickness and comb with a suitable notched trowel. Strictly apply the adhesive paste which can be tiled with in 10 to 15 mins.
• Intermittently touch the adhesive paste on substrate by finger. If the adhesive sticks to fingers then continue tiling and if not scrape off the adhesive and apply new coat.
• Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids.
• Keep joints between two-tiles using tile spacers.
• Allow tiling to set for 24 hours and start filling joints next day with Roff Rainbow Tile Mate.
• Use mechanical clamps for holding the heavy stones in positions on vertical surface if required.

Precautions & Limitations

• For laying Marble/ stone on floor, surface should be sufficiently hard & good condition.
• Always add powder to water & never add water to powder.
• Do not add excess water than recommended.
• Never add sand & cement at site in factory packed adhesive.
• Strictly not recommended for fixing on gypsum plaster, paint, wood & metal.
• Do not use for vertical cladding of heavy stone. Start from down to up.
• For lift pits on high vibration & impactful surfaces. Please add with Roff RBR in Ratio 2%/ bag for more
• durability or contact Roff Technical Team.

T02 Roff Non Skid Tile Adhesive is a high-performance adhesive designed specifically for securing tiles in both residential and commercial applications. Its non-skid properties ensure a strong bond that prevents tile movement, enhancing safety and durability. This adhesive is suitable for various surfaces, including concrete, cement, and plaster, making it versatile for different installation environments. Easy to apply and quick to set, T02 Roff provides a reliable solution for achieving a flawless tile finish.

Features & Benefits

• Ready to use, needs only mixing with water
• Excellent adhesion, low shrinkage
• Suitable for indoor and tile on tile applications
• Needs no curing, needs no hacking or mechanical key on the surfaces
• Floors can be used after 24 hours
• Soaking of tiles & backing of surface not required

Method of Application

• The surface to be tiled should be clean and sound. Old surfaces must be free from wax, grease, polish, etc.
• Add 3 - 3.5 parts of Roff NSA powder to 1 part of water. 
• Mix with a trowel / slow speed drills (50 - 100 rpm) until a lump free homogeneous paste is obtained.
• Always mix the required quantity, which can be consumed with in the prescribed pot life.
• Leave the mixture for 5 min. before using it.
• Spread the adhesive to a required thickness and comb with a suitable notched trowel. Strictly apply the adhesive paste which can be tiled with in 10 to 15 mins.
• Intermittently touch the adhesive paste on substrate by finger. If the adhesive sticks to fingers then continue tiling and if not scrape off the adhesive and apply new coat.
• Start placing the tiles on the surface to be tiled. Tap the tiles properly to ensure complete coverage of the backside of tiles and to eliminate the possibility of any air voids.
• Keep joints between two-tiles using tile spacers.
• Allow tiling to set for 24 hours and start filling joints next day with Roff Rainbow Tile Mate.
• Use mechanical clamps for holding the heavy stones in positions on vertical surface if required.

Precautions & Limitations

• Always add powder to water and not water to powder
• Do not add more water than recommended.
• Do not add sand or cement at site.
• Before doing tile-on-tile application, ensure that the original tiling surface is in sound condition.
• In case of undulations in the existing floor, rectify the same before applying Roff Non-Skid Adhesive.
• Strictly not recommended for the direct use on gypsum plaster, paint, wood & metal.

Choosing the right wall tile adhesive depends primarily on the tile material (ceramic vs. porcelain), the size of the tiles, and the environment (dry rooms vs. wet areas like showers).

High polymer modified adhesive for fixing tiles and natural stone on interior and exterior floor & wall.

Designed especially for interior and exterior floor and wall installations of all types of ceramic tile, vitreous/vitrified, semi-vitreous tile, glass mosaic tiles, precast terrazzo, - and natural stones over concrete and on a variety of substrates. Good underwater shear bond allows this product to be used for wet areas like swimming pools, sauna, water bodies and washrooms. Can also be used as slurry bond adhesive in wet on wet applications, tile on tile applications.

Coverage: Approx. 55-60 Sft per 20 kg pack using 1/4͟x 1/4͟(6mm x 6mm) square notched trowel for a bed of 3mm. 

Ardex Endura Bronze Star Tile Adhesive is a high-performance adhesive designed for the installation of ceramic and porcelain tiles. This versatile product offers exceptional bond strength and flexibility, making it suitable for both interior and exterior applications. Its quick-setting formula allows for rapid installation, reducing downtime and enhancing productivity. Additionally, Ardex Endura Bronze Star is resistant to moisture and temperature fluctuations, ensuring long-lasting durability in various environments. Ideal for professional tilers and DIY enthusiasts alike, this adhesive guarantees a reliable and efficient tiling solution.

MYK Laticrete 305 (LATAFIX 305) is a single-component, polymer-modified cementitious tile adhesive designed for interior floor and wall applications, suitable for small and medium-sized ceramic and natural stone tiles. It is an economical, factory-made powder that is easy to use, requiring only water for mixing, and provides high bond strength, good workability, and shrinkage control for reliable tile installations

KERALASTIC THigh performance two-component polyurethane adhesives for ceramic tiles and stone material.
Applications:
Keralastic is an improved reaction resin adhesive (R2). Interior and exterior floor and wall bonding of ceramic tiles, natural stone and agglomerates, mosaic on all types of substrates normally used in building. Particularly suitable for metal, wood, fibre-cement, rubber, PVC and linoleum surfaces. Absolutely necessary for bonding natural stone and agglomerates (all types of marbles, Verde Alpi, slate,…) also subject to movement and size variation due to the absorption of water (class C of dimentional stability according to Mapei standards). Applied in a continuous layer, they create a perfect waterproof surface on which ceramic tiles can be applied with the same product. Suitable for surfaces subject to accidental contact with water (for example wooden kitchen work surfaces).
Keralastic T (R2T) is the thixotropic version of Keralastic and is particularly suitable for vertical applications.
Technical data:
Open time: 50 minutes.
Grouting: 12 hours.
Set to light foot traffic: approx. 12 hours.
Ready for use: approx. 7 days.
Deformability: highly deformable.
Colours: grey and white.
Application: notched trowel n. 4 or 5.
Storage: 24 months.
Consumption
2.5-5 kg/m2.
Packaging
5 and 10 kg units (A : B = 94 : 6 parts by weight).
Keralastic Keralastic T are CE marked as declared in ITT certificates nº 25040320/Gi (TUM) and nº 25040471/Gi (TUM) respectively, issued by the Technische Universität München laboratory (Germany).

Two component, high strength epoxy adhesive, which is formulated for the spot bonding method of tile and stone installations on vertical surfaces. LATAPOXY® 310 Stone Adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C).

Products from MAPEI India are applied on floors or used for wall finishing, both on the interior and exterior areas. They provide higher hostility to moisture and scraping among other things which may otherwise ruin the floor.